why my ipad 3' battery did not get design capacity = current capacity when i first activated it and install batterydetective ?
cycle count: 0
current capacity: 11240 mAh
design capacity: 11560 mAh
percentage: 97,23%
and my ipad 2 was in the same case.
is it normal or it must be design = current when ipad 3 is activated?
ok thks. now i knew. i thought that my battery was damaged.
So ipad 3' battery design capacity never equal to current capacity even it is first used with 0 cycle count. almost around 11,250 and 11,300 mAh (o cycle count)
The Following User Says Thank You to aaaaaaaa2505 For This Useful Post:
ok thks. now i knew. i thought that my battery was damaged.
So ipad 3' battery design capacity never equal to current capacity even it is first used with 0 cycle count. almost around 11,250 and 11,300 mAh (o cycle count)
Yeah also i think it goes for all other devices
and after total 400 cycle counts you will only be able to use 80% charge of design capacity
Last edited by AppleHacker; 07-03-2012 at 12:01 AM.
The Following User Says Thank You to AppleHacker For This Useful Post:
i think it's only for iphone. i tried it on ipad.. the capacity increased for sure but after 2-3 days, it would go down slower than last time. i ensure for that
The Following User Says Thank You to aaaaaaaa2505 For This Useful Post:
iPad 3 is one of the best Apple gadget which is running on best iOS 5.1.1 operating system and powered by 1 GHz processor. It has standard li-Po battery with 11,560 mAh that stand by Up to 720 hour and provides talk time up-to 10 hours.
Battery capacity on ipad 3
.
